Site: Home > Products > Thrust Bearings > Cylindrical Roller Thrust Bearings > Cylindrical Roller Thrust Bearings

The cylindrical roller thrust bearing is applied to take axial loads. It has a high load capacity. The housing washer and the shaft washer of it are made of bearing steel. The cage material can be copper base alloy, aluminum alloy, steel. The cylindrical roller thrust bearings made in NNN use copper base alloy as the basic cage material. Aluminum alloy & carbon steel and plastic are also avaiable on the request of the clients. In that case, some special suffix should be appended to the bearing codes to show the difference.

Please input product code:     Please input product size:d    D    B/H/T      
Designations d D B H T r min Dynamic(C) Static(Co) Grease Oil Weight(kg)
 81116  80  105    19      106  350  650  2600  0.4
 81216  80  115    28      201  630  600  2400  0.9
 89316  80  140    36      305  1110  525  2100  2.37
 87416  80  170    41      450  1810  475  1900  5.32
 89416  80  170    54      560  1770  47.5  190  6.41
 81117  85  110    19      112  385  625  2500  0.42
 81217  85  125    31      217  660  575  2300  1.26
 89317  85  150    39      325  1140  2000  500  3
 87417  85  180    42      485  1920  450  1800  5.53
 89417  85  180    58      620  1980  450  1800  7.55
 81118  90  120    22      141  465  575  2300  0.62
 81218  90  135    35      290  890  525  2100  1.77
 89318  90  155    39      330  1200  475  1900  3.283
 87418  90  190    45      510  2090  425  1700  6.65
 89418  90  190    60      680  2200  425  1700  8.77
 81120  100  135    25      199  650  500  2000  0.95
 81220  100  150    38      285  840  475  1900  2.2
 89320  100  170    42      380  1400  425  1700  4.19
 87420  100  210    50      680  2800  375  1500  9.02
 89420  100  210    67      850  2350  375  1500  11.9